Wood stoves

2 of 41

APOLLO

J. A. ROBY | Model #PBAP

The APOLLO can be used in place of a furnace to circulate heat in the room where it is installed using the 460 CFM included. A second blower of the same power cans also be added for greater comfort (optional). High efficiency wood stove provided with heat accumulator unit on top allowing a better distribution of the heat throughout the room and optimizing the heating capacity of the unit. US EPA NSPS 2020 and CSA B415.1 certified

Features

Model with one arched cast iron door
High efficiency US EPA NSPS 2020 and CSA B415.1 certified appliance
Recommended heating Area (sq.ft.) : 1,000 to 3,500
Color: metallic black
Model: on legs
Chrome handles and corners
Heat accumulator including 460 CFM blower and thermodisc
Two 6" collars for 90° elbow
Convection and radiation heating
Self-cleaning system of the glass surface
Low clearances to combustible materials
Ceramic wool baffle
Outdoor air intake
Blower 460 CFM
Firebox lined with refractory bricks for better heat diffusion
Stainless steel secondary air system to improving gas combustion
Recommended chimney : 6"
Low emissions 1,56 gr/h
LHV 77,75%
Recommended logs length 16"
Maximum log length 22"
Mobile home certified
Tested as per applicable standards by Intertek

Options

Outdoor air intake package kit (ECPAE)

MSRP : Details in store

Certifications

Print Send to a friend

Specifications
Pieces
Accessories

Type of fuel : Wood
Recommended heating area : 1,000 - 3,500 pi²
Combustion length : 4 to 14 hours
Maximum output : 130 000 BTU
Steady state : 77.75 %
Firebox dimensions : Width 18"
Height 15-1/8"
Depth 22-½"
Maximum log length : 22"
Exteriors dimensions : Width 26"
Height 56-1/4"
Depth 33-5/8"
Type of chimney : 2100° F.
Exaust pipe diameter : 6"
Recommended chimney diameter : 6"
Minimum chimney height : 12'
Minimum clearances to combustibles : Back 13-1/2"
Side 16"
Corner 8-3/4"
Top 84" (measured from floor)
From collar to back 12"
From collar to side 24-3/4"
Weight : 460 lbs
Standard test - US emissions : US EPA NSPS 2020
Standard test - Canada emissions : CSA B415.1-10
Standard test - safety : CAN/ULC S627 and UL 1482
Warranty : Limited lifetime

Back