J. A. ROBY INC.490, rue de l'Argon T. (418) 849-8095 | F. (418) 849-0077 |
|
APOLLOWood stoves
The APOLLO can be used in place of a furnace to circulate heat in the room where it is installed using the 460 CFM included. A second blower of the same power cans also be added for greater comfort (optional). High efficiency wood stove provided with heat accumulator unit on top allowing a better distribution of the heat throughout the room and optimizing the heating capacity of the unit. US EPA NSPS 2020 and CSA B415.1 certified Features
OptionsOutdoor air intake package kit (ECPAE) --
|
|
Specifications |
||
Type of fuel : | Wood | |
Recommended heating area : | 1,000 - 3,500 pi² | |
Combustion length : | 4 to 14 hours | |
Maximum output : | 110 000 BTU/h | |
Steady state : | 77.75 % | |
Firebox dimensions : | Width 18" Height 15-1/8" Depth 22-½" | |
Maximum log length : | 22" | |
Exteriors dimensions : | Width 26" Height 56-1/4" Depth 33-5/8" | |
Type of chimney : | 2100° F. | |
Exaust pipe diameter : | 6" | |
Recommended chimney diameter : | 6" | |
Minimum chimney height : | 12' | |
Minimum clearances to combustibles : | Back 13-1/2" Side 16" Corner 8-3/4" Top 84" (measured from floor) From collar to back 12" From collar to side 24-3/4" | |
Weight : | 460 lbs | |
US EPA 2020 Method 28R : | US EPA 2020 NSPS CERTIFIED | |
WELL MADE HERE : | WELL MADE HERE | |
Standard test - US emissions : | US EPA NSPS 2020 | |
Standard test - Canada emissions : | CSA B415.1-10 | |
Standard test - safety : | CAN/ULC S627 and UL 1482 | |
Warranty : | Limited lifetime |