J. A. ROBY INC.490, rue de l'Argon T. (418) 849-8095 | F. (418) 849-0077 |
|
ULTFWood Furnaces
The high efficiency ULTF wood furnace has been specially designed to heat surfaces up to 3700 ft2 and is provided with a central heating system operating with a wall thermostat. Its performance offers 140 000 BTU output and has an autonomy up to 22 hours. The ULTF furnace is equipped with a unique heat exchanger system allowing gases to move quicker through the furnace and then, move to the chimney. Heat is then pushes throughout your home within ventilation ducts by the fan. The ULTF furnace is one of the cleanest appliances in its category; it releases only 2.27 g/h of particles according to EPA calculations and do not exceed 0.07 g/Mj on 0.4 g/Mj allowed by the Canadian standards CSA B415.1-10, which is almost 5 times less than the limit. Features
OptionsAdapter choice: two exit of 8" (20cm) or 4 exit of 6" (15cm) -- Universal air filter 10 X 20 X 1 (ULTF10201) --
|
|
Specifications |
||
Type of fuel : | Wood | |
Recommended heating area : | 1500 to 3700 pi² | |
Potential energy input : | 361,200 BTU/h | |
Combustion length : | 6 to 22 hours | |
Maximum output : | 140 000 BTU at the exit | |
Firebox dimensions : | Width 20 ½" Height 15" Depth 25 ½" | |
Door opening dimensions : | 15 ¾" x 9 ½" | |
Maximum log length : | 25" | |
Exteriors dimensions : | Width 29 1/8" without electrical box 33 5/8" with electrical box Height 46" without plenum 52 â " with plenum Depth 46 ¾" without fan box 48 7/8" with fan box | |
Hot air exit on top : | 13 ½" x 13 ½" | |
Type of chimney : | 2100ºF | |
Exaust pipe diameter : | 6" | |
Recommended chimney diameter : | 6" | |
Minimum chimney height : | 12' | |
Minimum clearances to combustibles : | Back 1" Lateral 6" Top 84" (measured from floor) | |
Weight : | 550 lbs | |
Standard test - US emissions : | CSA B415.1-10 0,07g/Mj 2,7g/h | |
Standard test - safety : | CSA B366.1-11 | |
Warranty : | Limited lifetime |